info@siliconenab.com
Telefon : +982148021111
General Purpose Silicone Rubber For Extruded are specifically designed for multi-purpose applications including molding, injection, extrusion of profiles and wires. The application of this category of silicones is expanded by adding fillers and additives, and also this category of silicones can be produced in different levels of hardness.
General-usage silicones are a group of PPT-reinforced silicone products, which have become the most widely used group of HTV silicones due to their favorable characteristics and properties as well as reasonable prices. Silicones for general use of Nab Silicon Company, due to the integrated and continuous production process, significant time and energy consumption and special production conditions, have a performance very close to silicones for special and specialized use. One of the benefits of Silicone Nab products is the use of more energy and the additional process of the reactor to separate and extract VOC from the final product.
BASE 80 BASE 75 BASE 70 BASE 60 BASE 50 BASE 40 BASE 30 Test Methods Properties / Gade No. Transparent ASTM E 1767 Colors 240 260 250 230 210 190 150 ADTM D 926 William's plasticity 1.21 1.19 1.18 1.16 1.14 1.13 1.08 ASTM D 792 Specific gravity 80 75 70 60 51 41 31 ASTM D2240 Hardness 8.5 9 10 9.5 9 8.5 7.5 ASTM D 412 Tensile strength (MPa) 290 ASTM D414 Elongation (%) 11 ASTM 624 "B" Tear strength (kgf/cm) 3.7 4.0 JIS K 6249 Linear shrinkage (%) 1015 1015 1015 ASTM D257 Volume resistivity (ohm.cm) 27 27 ASTM D 149 Dielectric strength (kV/mm)
PRODUCTS Test Methods Typical Properties Base-300 Base-500 Base-700 Transparent Transparent Transparent Transparent Transparent Transparent Colors HC-2/1.5 HC-8/1.8 HC-2/1.5 HC-8/1.8 HC-2/1.5 HC-8/1.8 Catalyst / Amount (phr) 116/10 171/10 116/10 171/10 116/10 171/10 Press Cure (min) 200/4 200/4 200/4 200/4 200/4 200/4 Post Cure (hrs) 1.08 1.08 1.14 1.14 1.18 1.18 ASTM D792 Specific Gravity (25) 40 35 55 53 73 70 ASTM D2240 Hardness (shore A) 60 90 110 110 110 110 ADTM D412 Tensile Strength (kgf/cm2) 420 600 450 550 300 400 ASTM D412 Elongation (%) 12 16 20 22 27 24 ASTM D624 "B" Tear Strength (kgf/cm) 60 65 48 50 47 50 JIS K 6255 Rebound (%) 55 45 37 40 35 31 ASTM D395 Compression Set ^2. 10 ^2. 10 ^4.10 ^4.10 ^4.10 ^4.10 ASTM D257 Volume Resistivity (cm) 22 25 23 26 23 26 ASTM D149 Dielectric Strength (kv/mm) YES YES YES YES YES YES FDA Food Contact
Silicone NAB Şirketi, temel silikonun tek üreticisidir ve tüm silikon zincirinin teknik bilgisine sahiptir. HTV silikon tabanı, çeşitli RTV Silikon Kauçuk türleri, silikon dolgu macunu ve silikon yağı, silikon monomerleri ve bileşikleri ile çeşitli ekstrüzyon ve kalıplanmış silikon ürünleri dahil olmak üzere çeşitli silikon ürünlerinin üretiminde onlarca yıllık deneyime sahip olup, yurt içinde faaliyet göstermektedir. ve küresel pazarlar.
İletişim
Head Office: No.3053, Above Zafaranieh Intersection, Vali-e-Asr Ave., Tehran, Iran.
Factory : Caspian Industrial Town, Qazvin Iran
Copyright 2023 Silicone Nab. All Rights Reserved.